Chopping down trees as good exercise

Chopping down trees as good exercise

You need to prune? It is better to have a certified company because it is a dangerous exercise. The pruner often works at height and uses a pruning saw, pruner or chainsaw that has been cleaned and disinfected. The operation consists in controlling the development of the trees by a precise and well thought outsize in order to restrict an invasive development, to stimulate the fructification, or to answer to aesthetic criteria.


In each season its size of the trees

The pruning can, however, perform in every season the effects will be different when the operation is performed in the winter or spring. The winter size is the most favorable because the trees are dormant and you will have less waste to evacuate. In the spring, it’s more like a shaping size.


Pruning: neither too early nor too late

Prune treeThe most important thing is to prevent the exposed wood from being exposed to extreme temperatures. For this reason, it is generally not recommended to prune in the middle of winter for all round dental health or summer unless you live in a very temperate maritime region.


The resinous, generally hardier species than deciduous trees, to prune more likely in late autumn.


In the case of hardwoods, early spring will be favored, while sap growth gives trees relative resistance to pests, while leaf development is still insufficient to increase the volume of plant waste to be evacuated.


The pruning of fruit trees is done in the early autumn.



Dress wounds with tar or putty to prevent infection

Never prune if the outside temperature is below -3 ° C or too hot

Prevention and risks

As for brushing, the law recommends wearing personal protective equipment (cut-resistant clothing, helmet, hearing and visual protection, safety harness). The purpose of the operation is to reduce:


Falling trees or branches

The lack of visibility

Malfunction (electrical network, telephone, air, road)

The imperatives

Do you own a garden? You are therefore required to cut the branches of your trees that exceed your neighbors (at the separating limit, on the road …) by applying the most appropriate regulations:


Near a road or electrical network

Near private land (rural code)

It is advisable to approach a professional who knows the legislation and the steps to be taken to obtain authorizations and it is forbidden to use noisy tools outside imposed schedules which are:


Monday to Friday: 08:30 to 12:00 and 14:30 to 19:30

Saturday: 09:00 to 12:00 and 15:00 to 19:00

Sunday: 10:00 to 12:00


Tree cutting

Tree feeling before proceeding to the feeling of a tree, always make sure to control the operation of your chainsaw by training on trunks already on the ground and determine the direction of slaughter. For this, take into account the direction in which the wind blows, because it will facilitate your gesture by pushing the tree.


Also, check that it will fall into an unoccupied area and that those present with you are at a distance equivalent to at least twice its total length.


First saw the lower branches, which may be bothering you, then place the chainsaw at the height of your chest (never higher) and on the side (especially not facing you). Then saw the tree without precipitation, blade flat, using the trunk as protection between the chainsaw and you.


The stump of a tree?

Stump removal is a process of extracting the roots and stump of a felled tree. It eliminates clogging of pipes, deterioration of foundations and possible foci of infection due to a fungus such as Armillaria mellea .


The operation requires a very strong force and is done by pushing or pulling manually or mechanically:


For a manual operation, there are, in specialized shops, stain removal products, whose objective is to facilitate the withdrawal. It will then be enough to pull the stump with a puller after cutting off its roots and dig trenches of uprooting.

For a mechanical operation, the machine used will determine the technique. For a push, a backhoe loader is ideal. However, to shoot, the use of a machine as a tractor that can pull a chain attached to the stump is essential.

In short

Tree pruning operation is therefore to reduce the size of a tree by removing the cumbersome branches located laterally. To prune, always start by selecting your tool based on the length and size of the branches.


A telescopic pruner will suffice for the finest, while a pruning saw or even a chainsaw will eliminate large branches. Disinfect the slides that you will use to avoid spreading any fungi or diseases, then make cuts at an angle near the nodes, to facilitate the regeneration of the tree.


Remove as many branches as possible from the center to allow light to penetrate, being careful not to scratch the bark when pruning branches near the trunk. Once pruning is complete, remove residues and brush larger cut ends with a healing product to prevent disease.


Close Menu